What rhymes with dragline excavator?
dragline exca·va·tor

A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining. Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site. Most crawler cranes, with an added winch drum on the front, can act as a dragline. These units (like other cranes) are designed to be dismantled and transported over the road on flatbed trailers. Draglines used in civil engineering are almost always of this smaller, crane type. These are used for road, port construction, pond and canal dredging, and as pile driving rigs. These types are built by crane manufacturers such as Link-Belt and Hyster. The much larger type which is built on site is commonly used in strip-mining operations to remove overburden above coal and more recently for oil sands mining. The largest heavy draglines are among the largest mobile land machines ever built. The smallest and most common of the heavy type weigh around 8,000 tons while the largest built weighed around 13,000 tons. A dragline bucket system consists of a large bucket which is suspended from a boom (a large truss-like structure) with wire ropes. The bucket is maneuvered by means of a number of ropes and chains. The hoist rope, powered by large diesel or electric motors, supports the bucket and hoist-coupler assembly from the boom. The dragrope is used to draw the bucket assembly horizontally. By skillful maneuver of the hoist and the dragropes the bucket is controlled for various operations. A schematic of a large dragline bucket system is shown below.

more definitions for dragline excavator »